Rapid precision cooling medical device Target Cool®
Pain-free, downtime-free skin treatment
Target Cool®
Point1Drugs in the form of ice crystals can be painlessly introduced into the dermis
Point2CO₂ refrigerant is sprayed to relieve pain and inflammation! Also suitable for acne treatment and hair growth treatment
Target Cool®
SCROLL DOWN
BIANCA CLINIC's unique initiatives
attempt
Introduced in 30 countries around the world!
"Target Cool" is a cosmetic medical device that is still rare in Japan
Target Cool is a medical cosmetic device that is becoming a trend and is widely used in 30 countries around the world, including Korea and Europe. It controls the cooling temperature and time by spraying low-temperature CO2 gas at high speed. It is used for a wide range of purposes, such as instantly turning medicine into fine ice needles and introducing it into the skin, relieving inflammation through cooling, and improving skin quality by introducing COXNUMX.
By changing the nozzle at the tip, it can be used in three modes. Boosting mode, which injects and introduces medicine and CO₂ at the same time, Cooling mode, which injects CO₂ refrigerant to relieve pain and inflammation, and Freezing mode, which destroys diseased tissue with extremely low temperature CO₂ refrigerant. BIANCA CLINIC offers treatments in Boosting mode and Cooling mode.
The boosting mode is compatible with not only various medications such as Botox, tranexamic acid, and placenta, but also skin-care products such as Plurial Silk, Jubeluk, and GOURI, as well as the introduction of exosomes. The cooling mode is primarily used for acne treatment and hair growth treatment.
Case introduction
Cases
Cases.1
-
Treatment name
Jubeck Injection by Target Cool
-
Our Treatments
Left photo: Before treatment / Right photo: Immediately after treatment
◆ Treatment period and number of sessions: 1 session
◆Cost: 66,000 yen
◆Risks and side effects: redness, swelling, hypercooling, allergies to the medication used, etc.
Cases.2
-
Treatment name
Target Cool pulliar injection
-
Our Treatments
Left photo: Before treatment / Right photo: Immediately after treatment
◆Plureal injection using Target Cool
◆ Treatment period and number of sessions: 1 session
◆Cost: 66,000 yen
◆Risks and side effects: redness, swelling, hypercooling, allergies to the medication used, etc.
Cases.3
-
Treatment name
Botulinum toxin injection using Target Cool
-
Our Treatments
Left photo: Before treatment / Right photo: Immediately after treatment
◆ Treatment period and number of sessions: 1 session
◆Cost: 27,500 yen
◆Risks and side effects: redness, swelling, hypercooling, allergies to the medication used, etc.
Cases.4
-
Treatment name
Botulinum toxin injections using Target Cool (fine wrinkles)
-
Our Treatments
Left photo: Before treatment / Right photo: Immediately after treatment
◆ Treatment period and number of sessions: 1 session
◆Cost: 27,500 yen
◆Risks and side effects: redness, swelling, hypercooling, allergies to the medication used, etc.
Do you need forest bathing?
Recommended for:
I want to receive skin treatment without having to worry about downtime
I am interested in treatment using advanced medical equipment.
I don't like the pain of skin injections or skin treatments
Want to improve skin quality immediately?
I want to improve my acne-prone skin.
I want Skin Booster to penetrate* the skin efficiently
worried about thinning hair
Features
Characteristics
Skin boosting without pain or downtime
Among the functions of Target Cool, the one that has attracted the most attention is the Boosting Mode. In this mode, ice needling technology is used, which sprays cooling gas at high speed to turn the medicine into fine ice particles and allow them to penetrate the skin.* This allows the medicine to reach the dermis layer without altering it, and you can expect immediate improvements in skin quality.
Bianca Clinic offers skin boosters such as Plurial Silk, Jubeluk, and GOURI. We also offer a selection of medications tailored to your concerns, such as Botox, placenta, and tranexamic acid.
*Recommended treatment intervals vary by drug.
*Penetration: Microparticles of cooled drug solution accumulate in high concentrations at the DEJ (epidermal-dermal junction) and then penetrate into the dermis layer.
Cooling mode for gentle acne treatment and hair growth promotion treatment
Target Cool's cooling mode is a treatment that effectively soothes acne inflammation by precisely controlling the temperature of refrigerant between -10℃ and 5℃ and spraying it onto the skin surface.
Because the cooling temperature and irradiation time can be finely adjusted, a reduction in inflammatory cytokines has been confirmed, which is expected to alleviate symptoms such as redness and swelling.
In addition, the cooling stimulation temporarily increases blood flow to the scalp, promoting hair follicle metabolism and stem cell activation.
Since it also suppresses hair loss factors (TGF-β) and increases hair growth factors (IGF-1), it is expected to be effective when used in combination with improving the environment for hair growth and preventing hair loss.
Another feature of this mode is that it can non-invasively introduce CO₂ into the skin. CO₂ has antioxidant properties, and the Bohr effect promotes oxygen supply to tissues, increasing blood flow, promoting angiogenesis, and reducing inflammation.
*The recommended treatment interval for acne treatment is once a week.
*Bohr effect: The phenomenon in which hemoglobin's ability to bind or release oxygen changes depending on the concentrations of oxygen and carbon dioxide in the blood.
Benefit
Merit
Merit.1
You can easily see the changes in your skin immediately after the treatment
Drug delivery by Target Cool can deliver ingredients directly from the skin surface to the dermis, about 0.3 to 0.4 mm deep. This depth is shallower than manual injections, so you can easily feel changes in your skin immediately after the treatment.
Merit.2
There is little to no downtime to worry about
Target Cool does not use needles, so there is no need to worry about internal bleeding or needle marks, and there is no downtime. It puts less strain on the skin, so you can receive treatment with peace of mind.
*People with allergies to medications or temperature changes may experience redness or itching.
Treatment site
Treatment Area
full face
Price list
Price list
Advice from Doctor BIANCA
Advice
■Recommended for those who have avoided Skin Booster treatments due to concerns about pain
Target Cool's boosting mode is an ice needling technique that uses cooling gas to gently deliver the skin booster drug down to the dermis layer. Since it does not use needles, pain and irritation can be significantly reduced, so it is a treatment that we would like people who have been afraid of injections or worried about downtime to consider.
■Also pay attention to the Bohr effect caused by CO2 introduction
One of the features of Target Cool is that it can non-invasively introduce CO₂ into capillaries through the epidermis and dermis. CO₂ that reaches the blood vessels changes the pH inside red blood cells, causing the Bohr effect, which makes it easier for hemoglobin to release oxygen. This promotes oxygen supply, increasing cell metabolism and regeneration, and is expected to have effects such as suppressing inflammation and improving the skin's natural repair ability.
Flow of treatment
Content of treatment
01 Doctor's examination/counseling
We will explain the details of the treatment in detail during the consultation, and the doctor will check the condition of your skin during an examination. Please let us know your wishes, as well as any worries, questions, or concerns you may have. We will take the time to carefully examine you.
02 Make-off
Before the Target Cool treatment, we ask that you remove your makeup and wash your face. Cleansing products and facial cleansers are provided at our clinic.
03 Treatment
Treatment is performed on clean skin using Target Cool. The time required for treatment varies depending on the treatment, but it usually takes about 30 minutes including preparation, treatment, and finishing.
we also focus on minimizing downtime for treatments.
Downtime
[Boosting Mode]
If you are sensitive to temperature changes, you may experience redness for 2-3 days. You may also have an allergic reaction to the medication used.
[Cooling mode]
Those who are sensitive to temperature changes may experience redness for 2-3 days. Depending on your skin condition and the treatment environment, your skin may be temporarily overcooled, which may lead to pigmentation (PIH).
Frequently Asked Questions Q&A・Notes
Q&A
Treatment details: Target Cool
cost:
・27,500 yen to 66,000 yen *Depending on the medication used.
・Acne treatment costs 5500 yen per item
Estimated treatment period and frequency:
The treatment interval varies depending on the drug.
・For acne treatment, the recommended frequency is about once a week.
Side effects/risks: redness, swelling, hypercooling, allergies to the medication used, etc.
Regarding treatment using unapproved medical devices and drugs
・This treatment includes medicines that are not approved in Japan or treatments that have a different purpose than that approved by the Ministry of Health, Labor and Welfare.
Medical device approval number: FDA510k K230599, CE MDD: 2021-MDD QS-007, MFDS 21-69
・Medicines and medical devices used in treatment are imported by individuals at the discretion of our clinic's doctors. Please refer to the following for information on medicines and other items that should be taken into consideration when importing them for personal use.
https://www.yakubutsu.mhlw.go.jp/individualimport/purchase/index.html
- Except for products that have received pharmaceutical approval, there are no other domestically approved drugs or medical devices with the same ingredients or performance.
・Information related to safety in other countries
- Significant risks may not be apparent.
・In the unlikely event that serious side effects occur, you will not be covered by the national pharmaceutical adverse reaction relief system.
Search by aging concerns
Search By Aging Problem
Search for other problems
Search By Others Problem